Sometimes, when making a 3D printed object, plastic just isn’t enough. Probably the most common addition to our prints is the ubiquitous brass threaded inset, which has proven its worth time and again ...

Adding threads to your 3D prints is a life-changing feature, but obviously there are a lot of trade-offs and considerations when deciding on how to go about this exactly. Between self-tapping screws, ...

This article was updated May 25, 2023. It was originally published Nov. 17, 2009. To put hard, durable threaded holes in plastics, engineers often specify threaded metal inserts that will securely ...

The Emotet malware gang is now using a tactic that has been previously seen used by nation-state hackers. The group has been spotted this week reviving old email conversation threads and injecting ...

Inserts are classified as two general types: those held in place by external threads and those that use some means other than threads (knurls, grooves, interference fit) for their holding power.

We have all done it, overtightened a bolt and blown out the threads. When a bolt starts to tighten up and then go suddenly loose, you know that the threads are toast and now you have a problem.

Pemhex is a self-clinching prevailing torque lock-nut from Penn Engineering, with the integrated nylon insert there to resist screw loosening in service due to vibration and thermal cycling. “The ...

We’ve all had this happen at some point while tightening hardware: It feels like it’s snugging up nicely, and then it suddenly seems to tun too easily. Or maybe you were removing stubborn hardware and ...

Few things disturb us more than the bewilderment of a broken bolt or seized pipe plug in a casting. You’re at a loss for how to get the darned thing out. This is when you have to slow down and come up ...

Few things seem more hopeless than when you’re in the process of removing a bolt, screw, or stud and it breaks. At that point, you know it’s all over but the crying. You’ve busted a bolt off in a ...